Premium paint for facades and interiors Caparol Amphibolin Base 1 acrylate silky-matte, 2.5 l

Universal premium paint for facades and interiors with a reduced level of harmful emissions, does not contain solvents, with extremely high adhesion to almost any surface.

The paint is designed to create weatherproof exterior coatings on smooth or structural bases. Protects the surface from aggressive pollutants contained in the atmosphere. Universal paint, designed for mineral cement-lime and cement plasters, concrete, silicate brick, ceramic brick facing, strong old coatings, galvanized surfaces, rigid PVC, fiber-cement boards and wooden structures that do not preserve dimensions. It is not recommended to use the material in thermal insulation systems.

Inside, it is used to create extremely strong, abrasion-resistant coatings that retain the original texture. It is especially recommended for coatings subject to heavy loads. Due to its high light reflection coefficient, it is ideal for rooms with insufficient lighting, such as corridors, stairs, warehouses, workshops and underground garages.

• high level of adhesion on various types of substrates;
• high level of light reflection (20% higher than other paints);
• resistance to disinfectants and household detergents;
• low level of harmful emissions, solvent-free;
• hydrophobic, resistant to heavy precipitation according to DIN 4108;
• creates a thin layer, preserving the texture of the painted surface;
• protects reinforced concrete structures from the influence of CO2;
• high alkali resistance properties;
• meets the requirements of building certification according to LEED/BREEAM.

Container:

Base 1: 2.5 L, 12.5 L.

Degree of gloss: Silk-matt. Class G2 in accordance with DIN EN 1062.

Deviations in technical characteristics are possible due to tinting.

• Resistance to wet abrasion: R Class 1;
• Covering capacity: H10 Class 2, at consumption 8 m²/l.

Consumption: approximately 120 ml/m2 per one layer on a smooth surface. On uneven surfaces, the exact consumption can be determined by applying a test layer.

Application method: 

Apply Amphibolin with a brush, roller or mechanical method.

Poorly absorbent or non-absorbent surfaces should be primed with Caparol HaftGrund EG by spraying.

Example of setting parameters for the device: WAGNER PS 3.25 Standard nozzle: 517 - 519; pressure: 200 - 220 bar

HEA nozzle: 517 - 519; HEA pressure 120 - 140 bar Filters: in the machine 60; in sprayer 50 Productivity: 2.6 l/min

Dilution with water: up to 5%.