Decorative interior putty Caparol Stucco Eleganza acrylate shiny with a metallic effect 2.5 l, 2.5 l

Decorative plaster with the effect of silk Stucco Eleganza Caparol

Semi-gloss dispersion decorative toning plaster, which is intended for the decorative decoration of interior walls, effect of silk.

• easy in application;
• creates characteristic pattern;
• effective and reliable processing technology;
• 2nd class wet erasure.

Base color: Creamy-white, metallic.

Toning:

Toned machine with with ColorExpress in different shades Caparol 3D.

Toned material before application mix well 

The unusual pattern depends on the chosen shade putty and on the chosen application technique. When applying to adjacent areas, we recommend mixing the product from separate batches to avoid differences in shades.

Shine level: Silky-glossy.

Internal surfaces mineral plasters groups PII, PIII, gypsum and finishing plasters of soluble group PIV, plasterboard, plasterboard and concrete surfaces.

The surface must be dry, clean, strong, and free from separating substances.

Rough surfaces, walls and plasterboard ceilings surfaces with increased influence side must be prepared according to Q4 quality level. After drying, compensatory intermediate sanding is carried out with a maximum grain of P200-240. Apply Caparol ProfiGrund coating to level the absorption capacity and to fight dust.

Bases that which correspond to Q4 quality level as described in section            section      priming coating", directly cover with Samtex 3 E.L.F.

Primer coating.

As a primer (preliminary) coating use Samtex 3 E.L.F. in the color of the finish coat.

Intermediate coating.

Stucco Eleganza must be applied on large planes using the        method    on on wet  with a Venetian spatula. Thus, excessive tightening of the surface is avoided. When applying Stucco Eleganza with a short-pile roller, a minimum of two coats is required and, finally, smoothing with a Venetian trowel. The material should be applied so much that it is possible to smooth and form the pattern.

Finish coating.

Final coating is carried out in the same  manner as and intermediate coating. Here leveling should be carried out taking into account the master's application technique on the surface.

Stucco Eleganza is used undiluted.

Consumption:

Approximately 50-70 ml/m₂/ pass. The exact consumption is determined by trial application.