{"product_id":"interior-latex-paint-caparol-samtex-7-e-l-f-base-1-silky-matte-10-l","title":"Interior latex paint Caparol Samtex 7 E.L.F. Base 1 silky-matte, 10 l","description":"\u003ch2\u003e\u003cb\u003eInterior latex paint Caparol Samtex 7 Base 1 E.L.F. silky matte\u003c\/b\u003e\u003c\/h2\u003e \u003cp\u003ePaint  for creating durable, matte, thin-layer indoor coatings that repel dust and are easy to clean. Great for covering structural, embossed, embossed wallpaper, glass wallpaper, well emphasizes the structure of the base. Ideal for surfaces subjected to loads.\u003c\/p\u003e \u003cstrong\u003eScope of application:\u003c\/strong\u003e \u003cp\u003eFor painting indoor surfaces made of gypsum putty and gypsum putty, cement-lime or dispersion putties and plasters, concrete, clinker and silicate bricks, plasterboard plates. Also suitable for application on old layers of dispersion paint and on wallpaper for painting, which hold firmly. Due to the standard of environmental friendliness, E.L.F. is especially recommended for use in residential, office, hotel premises and in premises with high hygienic requirements (schools, kindergartens, medical institutions, restaurants, etc.). Ideal for application on structural fiberglass wallpaper.\u003c\/p\u003e \u003cstrong\u003eProperties:\u003c\/strong\u003e \u003cul\u003e \u003cli\u003e1 class resistance to wet abrasion according to DIN 13300;\u003c\/li\u003e \u003cli\u003emade according to E.L.F. environmental   - without solvents and plasticizers;\u003c\/li\u003e \u003cli\u003eeasy to apply and distribute over the surface;\u003c\/li\u003e \u003cli\u003ecreates particularly smooth, thin, latex coatings, which does overlay the natural texture of the base;\u003c\/li\u003e \u003cli\u003ecapable to diffusion: sd-value \u0026lt;0.6 m;\u003c\/li\u003e \u003cli\u003edoes not attract dust, thanks why the walls remain clean for longer;\u003c\/li\u003e \u003cli\u003eresistant to all household detergents and disinfectants (without alcohol content).\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eContainer:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003ePlastic bucket.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eBase 1 (white): 2.5 l and 10 l.\u003c\/li\u003e \u003c\/ul\u003e \u003cstrong\u003eTechnical characteristics according to DIN EN 13 300:\u003c\/strong\u003e \u003cp\u003eDepending on color toning technical characteristics paint can insignificantly change.\u003c\/p\u003e \u003cul\u003e \u003cli\u003eWet wiping: R-Class 1, corresponds to abrasion resistance according to DIN 53778.\u003c\/li\u003e \u003cli\u003eCoefficient of contrast: H10-Class 2 at consumption of 8 m\/l or 145 ml\/m (Base 1). \u003c\/li\u003e\n\u003cli\u003eMaximum grain size: S₁ fine, (\u0026lt; 100 μm).\u003c\/li\u003e \u003cli\u003eDensity: about 1.32 g\/cm3 for Base 1. approximately 1.20 g\/cm3 for Base 3.\u003c\/li\u003e \u003c\/ul\u003e \u003cp\u003e\u003cstrong\u003eApplication method: \u003c\/strong\u003e intended for application by brush, roller or airless spraying.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eParameters for mechanical application equipment WAGNER PS 3.25\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eStandard nozzle:\u003c\/p\u003e \u003cp\u003eNozzle number: 517\u003c\/p\u003e \u003cp\u003ePressure: 200 bar\u003c\/p\u003e \u003cp\u003ePaint dilution: from 0% to 10% water\u003c\/p\u003e \u003cp\u003eNozzle HEA: Number nozzle: 515-517\u003c\/p\u003e \u003cp\u003ePressure: 120-140 bar\u003c\/p\u003e \u003cp\u003eDilution paint: from 0% to 5% water\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eFilters:\u003c\/strong\u003e\u003c\/p\u003e \u003cp\u003eIn the compressor: mesh 60 In sprayers: mesh 50\u003c\/p\u003e \u003cp\u003eProductivity:\u003cstrong\u003e \u003c\/strong\u003e2.6 liters per minute.\u003c\/p\u003e \u003cp\u003eDilution depends on the power of the equipment (maximum productivity\/throughput) and the method of application. The angle and size of the nozzle depend on the speed of application (to achieve the desired layer thickness). Mix thoroughly before painting. The paint is made with optimal viscosity and does not need to be diluted under typical conditions of use. Do not use if the temperature of the environment, base or paint is lower than +5° C or higher than +30°C. After use, rinse the tools with water.\u003c\/p\u003e \u003cp\u003e\u003cstrong\u003eConsumption\u003c\/strong\u003e: about 80 ml\/m² for 1 layer on smooth base. On rough surfaces consumption increases accordingly.\u003c\/p\u003e","brand":"Caparol","offers":[{"title":"Default Title","offer_id":52742968213814,"sku":"prom-4001","price":185.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0939\/4615\/1222\/files\/farba-interierna-lateksna-caparol-samtex-7-e.l.f.-baza-1-shovkovysto-matova4001-16710651533637__3c69252378_77c72c83-5b35-4ec1-947c-57c5770be53a.jpg?v=1756385588","url":"https:\/\/dfadecor.com\/products\/interior-latex-paint-caparol-samtex-7-e-l-f-base-1-silky-matte-10-l","provider":"dfa-decor","version":"1.0","type":"link"}